El Niño Winter: Damp Air, Mold and Your HVAC
A wet El Niño winter can push indoor humidity past 60%. How to measure it, stop condensation and mold, and when a dehumidifier helps your South Bay home.
- The target: the EPA says to keep indoor humidity below 60%, ideally 30% to 50%. A basic humidity meter will tell you where you stand.
- The sources: cooking, showers and drying laundry indoors all add moisture. If your house has a crawlspace, moisture also comes up from the soil.
- The clock: according to the EPA, materials that get dried within 24 to 48 hours of a leak or spill usually won’t grow mold.
- The ground fix: the Department of Energy specifies polyethylene ground cover at least 6 mil thick on a crawlspace floor, whether it’s vented or not.
- The equipment: ENERGY STAR says certified dehumidifiers use 20% less energy than conventional units. Fix leaks and get your fans venting properly first.
What this means for you
if humidity is still above 60% after you’ve handled the obvious causes, or you spot mold near your ducts, call us at (408) 497-0444.
To keep mold in check, the EPA says to keep indoor relative humidity below 60%, and ideally between 30% and 50%. A wet El Niño winter can push a house past that line, and your furnace or heat pump isn’t going to bring the number back down for you. So the order goes like this: measure with a humidity meter, track down where the moisture’s coming from, and only then think about a dehumidifier or other HVAC equipment. Below, we walk through what to check and when it’s time to call.
Why a wet El Niño winter matters indoors
NOAA expects a strong to very strong El Niño this winter, which makes a wetter California more likely. The signal is weaker for the Bay Area than for Southern California, and nothing’s guaranteed, as we explain in our El Niño overview for Bay Area homes. But if the winter does turn out wet, damp weeks mean windows stay shut, coats come in wet and more laundry gets dried inside.
We don’t want to overstate this. Since 2023, our Housecall Pro records have the word “mold” in the notes of 2 of 2,975 scheduled jobs. Humidity comes up in 2 more (a humid attic in July 2025 and a humidifier request in July 2024), and “dehumidifier” doesn’t come up at all. Notes only capture what someone happened to type, and three winters is a small sample. So take that as a reason to measure before you buy anything, not as proof your house is fine.
Start with a number, not a feeling
A damp house doesn’t always smell damp. Pick up a humidity meter, put it in the rooms you’re worried about and check it for a week.
If it reads 45%, you can relax. If it reads 65% on the same bedroom wall every morning, you’ve got a project on your hands, because 65% is over the EPA’s 60% ceiling.
The indoor relative humidity range the EPA calls ideal for limiting mold, with a ceiling of 60%.
Source: U.S. Environmental Protection AgencyIn our experience, the reading that tells you the most is the one you take in the room that feels worst, at the time of day it feels worst. An average across the whole house just hides the problem.
Where the moisture comes from indoors
Most of the humidity in a house during winter is created inside it. The EPA notes that cooking and showering add moisture to indoor air, and says clothes dryers should vent to the outside. Laundry drying on a rack, a bathroom with no vent and a house sealed up against the rain all add more. None of these is a big deal by itself, but together they can push a closed-up house past the EPA’s 60% ceiling. That’s why a week of meter readings is worth more than a guess.
Moisture from the ground and from leaks
The source people don’t think about is the ground. If your home has a crawlspace, moisture works its way up through the soil underneath. The Department of Energy says moisture can get into a crawlspace through the soil as liquid or vapor, and can condense on the floor joists. The fix it recommends is heavy polyethylene ground cover, at least 6 mil thick, sealed tight to the walls and piers. According to the Department, that applies whether the crawlspace is vented or not.
The minimum thickness of the polyethylene ground cover the U.S. Department of Energy specifies for a crawlspace floor, whether the crawlspace is vented or not.
Source: U.S. Department of Energy, Building Science Education Solution CenterThen there’s the water you can actually see. The EPA says that if wet or damp materials are dried within 24 to 48 hours of a leak or spill, mold usually won’t grow. Catch a roof leak on day one and you’re patching it. Find the same leak in week three and you could be looking at a remodel.
The EPA’s window for drying wet or damp materials after a leak or spill, which in most cases keeps mold from growing.
Source: U.S. Environmental Protection AgencyCondensation: windows are the warning, ducts are the problem
Water beading up on a window is about the cheapest warning system you’ll ever have. The EPA says condensation can be a sign of high humidity.
ENERGY STAR offers a tighter target for cold climates: 30% to 40% humidity during heating season to help prevent window condensation. The Bay Area is mild, so we wouldn’t chase that number. Just treat foggy windows as a reminder to check your meter.
The more expensive version of this happens inside your system. The EPA’s mold course says heating and cooling systems need to be properly insulated to prevent condensation, and that ducts running through spaces that aren’t air-conditioned should be sealed and insulated. The EPA’s mold guide also says to keep air conditioner drip pans clean and drain lines clear.
If the condensate drain on your furnace or air handler backs up during a wet week, you can end up with water in places it shouldn’t be. Checking the drain is part of a furnace tune-up.
Condensation can also show up somewhere you’d never expect. One customer called about water dripping from a ceiling. Billy, a Modern Air technician, “checked every single thing” and found a likely cause: a vent pointed at the ceiling below a roof with no vents, which could have been creating condensation (Vicky I., Google review, 2026).
In our records, water problems are mostly drain problems, and they mostly show up with the air conditioner. Since 2023, 15 of our 2,975 scheduled jobs in Housecall Pro note a clogged drain, a full pan or a tripped overflow switch. Of those, 10 (67%) were scheduled in June, July or August, and none in December or January.
Crawlspace ducts and wet insulation
If your ductwork runs through a crawlspace or attic, a damp crawlspace affects the air you breathe, not just your floor. Here’s what to look for.
Check for duct runs that are sagging or disconnected, duct insulation that’s wet or stained, and standing water or bare dirt under the house. Bare dirt is exactly where the Department of Energy’s 6-mil ground cover should go. The EPA says insulation that gets wet or moldy generally can’t be cleaned effectively and should be replaced, and that duct cleaning won’t last if the moisture problem behind the mold isn’t fixed. If insulation has stayed wet longer than the EPA’s 24 to 48 hour drying window, plan on replacing it rather than trying to dry it out.
If you clean up mold without asking where the water came from, you’re just setting up a repeat visit. A March 2026 call in Morgan Hill is typical of the requests we get. A property owner told us two tenants had moved out because of mold, and asked us to check the ducts and the crawlspace for standing water and to look at the condition of the duct and boots. Our indoor air quality and ductwork pages explain what we inspect.
Filters and ventilation
Filters and ventilation help, but they play a supporting role. If the moisture source is still there, neither one will bring a 65% reading down to the EPA’s 60% ceiling on its own.
A clean filter keeps air moving well, and it can catch spores that are already in the air. What it can’t do is dry out your crawlspace. Check it monthly through the wet season and change it when it looks gray.
On ventilation, the EPA suggests opening doors or windows to get air moving when it’s practical. In a wet winter, that means doing it on the dry days between storms. Run your bathroom and kitchen fans while you shower and cook, and keep them going for a while afterward. Also make sure those fans vent outside, not into the attic.
When a dehumidifier actually helps
Say you’ve fixed the leaks, got the fans venting properly and dealt with the crawlspace, and you’re still reading above 60%. That’s the point where equipment starts to make sense.
For one damp room or a basement-type space, a standalone dehumidifier is the simplest fix. ENERGY STAR says certified units use 20% less energy than conventional ones that pull out the same amount of moisture. Its sizing chart suggests about 20 to 30 pints per day for a small to medium room that’s slightly to moderately damp. ENERGY STAR also recommends keeping the unit away from walls and furniture so air can move around it, and keeping the doors and windows to that space closed.
How much less energy an ENERGY STAR certified dehumidifier uses than a conventional unit that removes the same amount of moisture.
Source: ENERGY STARA whole-home dehumidifier hooks into your ductwork and treats the whole house through the system you already have. It makes sense when the whole house is the problem, when the numbers stay high even after the other fixes, or when you’re tired of emptying a bucket. A whole-home unit has to be sized to the house and set up with proper drainage, so it’s a job for a licensed contractor. If that’s where you’re leaning, have us take a look at the house first.
Andrew Salinas, owner of Modern Air, doesn’t want his technicians pushing equipment on anyone. “I’m about only delivering what’s needed and what the customer wants,” he says.
A lot of ductless heat pumps have a dry mode. What it actually does depends on the brand, so check your manual. We think it works well on damp, mild days. But if a space stays wet, you need to fix the moisture source or bring in a dedicated dehumidifier. If you’re replacing an older system anyway, California heat pump rebates can lower the cost of a ducted or ductless heat pump.
When to call a technician
Call if you see visible mold on or near your ducts, vents or equipment. Call if you smell something musty every time the fan starts. Call if your condensate drain overflows. Call if your meter stays above the EPA’s 60% ceiling for several days after you’ve dealt with the obvious causes, or if duct insulation or other materials have stayed wet longer than the 24 to 48 hour drying window.
One caution from the EPA: confirming that something is actually mold can take an expert, and sometimes a lab test. Don’t just take our word for it, or anyone else’s, about a stain. Ask to be shown the mold.
We’ll help you figure out whether it’s a drain, the ducts or the crawlspace.
Call or Text (408) 497-0444Free estimates · No pressure · CA CSLB #935704
How Modern Air helps
Modern Air is a family-run HVAC company in Morgan Hill, and we’ve been serving the South Bay since 2009. We help homes in San Jose, Morgan Hill, Gilroy, San Martin, Los Gatos and Santa Cruz County with the equipment side of the problem: drains, filters, ducts, and whether a dehumidifier is worth it.
Our maintenance program starts at $15 a month and includes two visits a year, one in fall (September 1 to November 30) and one in spring (March 1 to May 31), plus 10% off repairs and priority scheduling. As of November 2026, Modern Air has 222 Google reviews, 219 of them five stars.
Call Modern Air at (408) 497-0444 or book a furnace tune-up. CSLB #935704.
Frequently asked questions
What humidity level should I aim for in my house in winter?
The EPA says to keep indoor relative humidity below 60%, and ideally between 30% and 50%. An inexpensive humidity meter will tell you where you stand. If it reads above 60% for days at a time, there’s a moisture source somewhere you need to track down.
Does a heat pump or furnace dehumidify my home?
That’s not really what it’s for. Heating and cooling equipment is designed to control temperature. If moisture is an ongoing problem, fix the source first, then think about a dedicated dehumidifier or a whole-home unit connected to your ductwork.
Is mold in my ducts a reason to replace my HVAC system?
Usually not. The EPA says controlling mold comes down to controlling moisture, and if you don’t fix what’s causing the moisture, the mold will come back. Wet or moldy duct insulation generally has to be replaced rather than cleaned. If a technician says they found mold, ask them to show you.
Why are my windows fogged up this winter?
Condensation is a sign of high humidity. Showers, cooking, drying laundry indoors and a damp crawlspace all add moisture to the air. Use exhaust fans that vent to the outside, run them during and after showers and cooking, and check your humidity with a meter.
Can a higher-efficiency air filter fix a mold problem?
No. A filter can catch spores that are already floating around, but it doesn’t touch the water that’s letting mold grow. Deal with the leak, the condensation or the damp crawlspace first.
Keep reading
Have an HVAC Problem? Talk to a Local Tech.
Call, text, or send a message, a local technician gets back to you the same day.
Call or Text (408) 497-0444Free estimates · No pressure · CA CSLB #935704